Key takeaways
- “Bend the tool, not the wrist” — choose tool geometry that keeps the wrist straight for the work surface orientation.
- Power grips generate far more force with less effort than pinch grips; design tasks for power grips.
- Use torque-reaction arms and balancers to remove reaction forces and static holding loads.
- Manage hand-arm vibration exposure against the EU action value (2.5 m/s² A(8)) and limit value (5 m/s² A(8)).
Grip and handle design
- Power grip handles roughly 30–50 mm in diameter suit most hands
- Handle length should span the full width of the palm to avoid pressure in the palm centre
- Use non-slip, non-conductive, slightly compressible materials
- Avoid sharp edges and finger grooves that do not fit all hand sizes
- Prefer multi-finger triggers over single-finger triggers for repetitive use
Inline vs pistol grip tools
| Work surface | Recommended tool shape | Why |
|---|---|---|
| Vertical surface at elbow height | Pistol grip | Keeps the wrist straight while pushing horizontally |
| Horizontal surface at waist height | Inline / straight | Lets the operator push down with a neutral wrist |
| Horizontal surface above shoulder | Avoid — reposition the work | Overhead work drives high upper arm RULA scores |
Hand-arm vibration
Prolonged use of vibrating tools such as grinders, impact wrenches and sanders can cause hand-arm vibration syndrome (HAVS). Under EU Directive 2002/44/EC, the daily exposure action value is 2.5 m/s² A(8) and the exposure limit value is 5 m/s² A(8). Measurement follows ISO 5349.
Controls include low-vibration tool selection, regular maintenance, limiting trigger time and keeping hands warm.
Practical checklist
- Match tool shape to the work-surface orientation
- Check handle diameter and length against users’ hands
- Fit torque-reaction arms on high-torque fasteners
- Estimate daily vibration exposure (A(8))
- Watch wrist deviation on video during tool use