Pushing and Pulling Ergonomics: Carts, Trolleys and Material Transport

Reduce shoulder and back strain from pushing and pulling carts, trolleys and tuggers in manufacturing — key design factors, force measurement and ISO 11228-2 guidance.

Manual handlingIntermediate7 min read

Key takeaways

  • Initial (breakaway) force is usually much higher than the sustained force needed to keep a cart moving.
  • Wheel size, caster maintenance and floor condition have a large effect on required force.
  • Handles at around elbow-to-hip height and vertical handle options suit a wider range of workers.
  • Measure forces with a push-pull gauge and compare them with ISO 11228-2 or psychophysical reference tables.

Why push/pull tasks cause injury

Pushing and pulling load the shoulders, lower back and wrists. Risk rises with heavy loads, poor wheels, uneven floors, ramps, frequent starts and stops, and awkward handle heights. Pulling often leads to twisted postures, which is why pushing is generally preferred.

Design factors to check

  • Wheels and casters: larger diameter, appropriate material for the floor, regular maintenance
  • Floors: smooth, clean, free of cracks, thresholds and drainage channels
  • Handles: around elbow-to-hip height, ideally adjustable or vertical to suit different statures
  • Visibility: the operator should be able to see over the load
  • Route: minimise ramps, tight turns and doorways
  • Mechanical aids: powered tuggers or motorised carts for heavy or frequent moves

Measuring push and pull forces

Use a calibrated force gauge to measure initial force (to start the cart moving) and sustained force (to keep it moving). Repeat several times on the actual route and use the higher values. Compare results against ISO 11228-2 or published psychophysical tables such as those developed by Snook and Ciriello.

Practical checklist

  • Measure initial and sustained force on the real route
  • Inspect wheels and casters monthly
  • Check handle height against the operator population
  • Remove floor defects and thresholds
  • Assess shoulder and trunk posture on video